TechniSat VIOLA 2

36
4.4 General device functions
4.4.1 Switching on the device
> In order to guarantee good DAB+/FM reception, please fully extend the antenna
located on the rear of the device. To do so, please refer to Section 4.3.3.
> First prepare the Viola 2 for operation as described in Section 4.3.1 and 4.3.2.
> Switch on the Viola 2 by pressing the On/O buon.
Aer switching on for the first time, the device automatically performs a
complete scan in DAB mode. While scanning, the display information shows
the progress, as well as the number of digital radio stations detected. Aer
completing the station scan the first DAB+ channel is played.