44
> [Scanning...] appears on the display.
During the scan a progress bar and the number of stations found is displayed.
If no station is detected, check the telescopic antenna and, if required, change
the installation location (Section 4.3.3 / 2.2.1).
6.2.2 Selecting stations
> To select a DAB+ station, press the Tune + or Tune - buons and confirm the
station selection with Enter.
6.2.3 Signal intensity
> Briefly press the Info/Menu buon repeatedly until the signal intensity is shown
on the display by way of a bar chart.
Minimum signal intensity
Current signal intensity