TechniSat VIOLA 2 - FM Scan Setting

50
7. 4 Scan seing
In this menu item it is possible to set the sensitivity of the scan.
> Hold down the Info/Menu buon and use the Tune + or Tune - buons to select
the [Scan seing] item. Press the Enter buon.
> Select whether the scan should only stop for stations with a strong signal
[Strong Stations Only] or for all stations (including stations with a weak signal)
[All Stations].
With the All Stations seing the scan stops automatically upon detecting each
available station. This can result in weak stations being played with background
noise. When using for the first time, and aer carrying out the factory seings,
the [Strong stations only] menu item is preset.