TechniSat VIOLA 2 - Factory Settings Reset

59
EN
FR
IT
NL
NW
DK
PL
CZ
SK
8.4 Factory seing
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device to
factory seings to delete all the saved stations and then launch a new scan.
> Hold down the Info/Menu buon and use the Tune + or Tune - buons to select
the [System] item.
> Press the Enter buon.
> Using the Tune + or Tune - buons, select the [Factory seing] item and press
Enter.
> Using the Tune + or Tune - buons, select the [Yes] item to run the factory
seing and press the Enter buon.
All previously stored stations and seings will now be deleted. The device is now
in the same status as when delivered.