Technische Alternative UVR 16x2

Analogue function
21
Standard diagram for Demultiplexer
Parameters for Demultiplexer
Mode
Demultiplexer
Function quantity
A wide range of function quantities are available, which are applied
together with their unit and their decimal places.
Offset result (enable = off)
Optional: enter an offset value for the value if Enable = OFF
Offset multiplexer
selection
Optional: enter an offset value for the value of the Multiplexer
selection input variable
Reset values
Available for selection: Yes / No
If you select Yes and the Multiplexer selection input variable
changes, the value of the output variable will be overwritten by the
value of the variable for Result (enable = off).
If you select No and the Multiplexer selection input variable
changes, the value of the output variable is retained.
Offset
Optional: enter an offset value for the input variable
Variable (enable = off)
Display of the input variable for (Enable = Off) + Offset value
Value 1
Display of the input variable + Offset value