Run 1000 - Run 600 Excite
20
Run 1000
Run 600
Electrical connection
Before connecting the equipment to the mains power supply, ensure that
the electrical system specications comply to binding regulations. Check the
mains power supply specications on the label next to the switch.
Plug the power cable rst into the equipment socket and then into the wall
socket.
W
Check the state of the power supply cable periodically.
The wall socket must be located in a place where the plugging
and unplugging can be done easily and safely.
When plugging in, the switch on the equipment must be in the
OFF (0) position (i.e. the equipment must be switched o).
To Next Page
Loading...
