Technogym SYNCHRO ARTIS - Changing the Fuses

27
SYNCHRO ARTIS
A
CHANGING THE FUSES
W
The fuses must be changed by the Technogym Technical Support Service.
Before making the replacement, turn o the product by moving the switch to the 0 position and take the power plug out of the wall socket.
If no more of the supplied fuses are available, use certied fuses with identical electrical specications (3.15A (F) for the replacement.
Open the panel (A) to reach the fuses: put a nger in the hole and pull.
Remove the fuse holder, to the right of the switch, by pushing the lever.
Replace the blown fuse with a new one, as supplied.
Fit the fuse holder back into its housing, making sure it clicks in properly.
Close panel (A).