28
SYNCHRO ARTIS
TROUBLESHOOTING
The following is a list of problems that may occur during normal use of the product. If the remedies described do not solve the problem, contact Technical Support
for service.
Problem Cause Remedy
The product is not turning ON
Mains power failure
Check whether there is power at the socket by plugging in
another appliance that you know works.
Power supply cable damaged Contact the Technogym Technical Support Service.
The power supply cable is not correctly inserted Check the connection.
Burnt-out fuses
To replace the blown fuse with a spare contact Technogym
Technical Support Service.
Too noisy
The product is not level Check the position and level the adjustment feet.
Damaged bearings Contact the Technogym Technical Support Service.
Worn belt Contact the Technogym Technical Support Service.
Movement is not smooth when
the product is operating.
The pedal guide rails and/or travelling wheels are dirty. Clean the pedal guide rails.
To Next Page
Loading...
