USER MANUAL
2) Record Schedule. The parameters should be consistent with DVR local setting, as shown in
Picture 6-16.
Picture 6-16
Green stands for Normal record; Yellow stands for Motion detection; Red stands for I/O trigger record.
3) Mainstream: User may set Mainstream, as shown in Picture 6-17. The relevant parameters
should be consistent with DVR local setting.
Picture 6-17
6.3.4 Network
Unfold <Network> to show its sub-options: Network, Email, and DDNS configuration, as shown in
Picture 6-18.
1. LAN setting
DVR supports Static/DHCP/PPPOE modes. System default network type is <Static>. User
can set parameters as required. After the network parameters are modified successfully, DVR will
automatically restart to make the setting effective.
Picture 6-18
To Next Page
Loading...
