- 24 -
OSD (ON SCREEN DISPLAY)
4) Entering INPUT SELECTOR from the MAIN MENU
brings up a display that allows you to select the video
input that you'd like to monitor. Move the arrow using
the up/down buttons, then change the input source
with the left/right buttons located on either side of the
ENTER button.
To get back to the MAIN MENU move the arrow to GO TO
MAIN MENU and press ENTER.
OSD
ON/OFF
TEST
TONE
NIGHT
MODE
MASTER
VOLUME
DIGITAL
INPUT
SUBW.
LEVEL
ON/OFF MODE
SURROUND
SUBW.
R.LEVEL
CENTER REAR
DELAY
R.LEVEL
SLEEP
MUTING
C.LEVEL C.LEVEL
ON/OFF
OSD
ON/OFF
TEST
TONE
NIGHT
MODE
MASTER
VOLUME
DIGITAL
INPUT
SUBW.
LEVEL
ON/OFF MODE
SURROUND
SUBW.
R.LEVEL
CENTER REAR
DELAY
R.LEVEL
SLEEP
MUTING
C.LEVEL C.LEVEL
ON/OFF
5) Entering DIGITAL INPUT from the MAIN MENU brings
up a menu that allows you to select the audio input
you'd like to monitor.
6) Entering SURROUND MODE from the MAIN MENU
brings up a menu that allows you to select the
acoustical effects you'd like to use.
An asterisk (*) appears opposite the input currently
selected. To change this selection, move the arrow with
the up/down keys to the input you want and press ENTER.
The asterisk (*) will now appear opposite the input you
have selected.
For PHONO, TUNER, MD/TAPE 1, and VCR/VIDEO 1
inputs, ANALOG is the only selection available.
For TV/VIDEO 2, AUX/VIDEO 3, DVD/VIDEO 4 and CD,
ANALOG or DIGITAL may be selected. However you must
have DIGITAL audio connections and a DIGITAL or DTS
source to playback in DIGITAL. (i.e. DVD, SATELLITE, CD,
MD) Otherwise no sound will be heard.
To get back to the MAIN MENU move the arrow with the
up/down keys to GO TO MAIN MENU and press ENTER.
The choices available to you will vary according to the
function and type of input you are monitoring.
OSD
ON/OFF
TEST
TONE
NIGHT
MODE
MASTER
VOLUME
DIGITAL
INPUT
SUBW.
LEVEL
ON/OFF MODE
SURROUND
SUBW.
R.LEVEL
CENTER REAR
DELAY
R.LEVEL
SLEEP
MUTING
C.LEVEL C.LEVEL
ON/OFF
To Next Page
Loading...
Need help?
General
