- 26 -
OSD (ON SCREEN DISPLAY)
Your choices will vary according to the SURROUND
MODE you are using. Use the up/down buttons to move
the arrow and the right/left buttons to make your
selections.
An asterisk (*) appears opposite the language currently
selected. To change this selection, move the arrow with
the up/down keys to the language you want and press
ENTER. The asterisk (*) will now appear opposite the
language you have selected.
OSD
ON/OFF
TEST
TONE
NIGHT
MODE
MASTER
VOLUME
DIGITAL
INPUT
SUBW.
LEVEL
ON/OFF MODE
SURROUND
SUBW.
R.LEVEL
CENTER REAR
DELAY
R.LEVEL
SLEEP
MUTING
C.LEVEL C.LEVEL
ON/OFF
In the case of DTS or DOLBY DIGITAL, your choices
are:
FRONT: SMALL or LARGE
CENTER: NONE or SMALL or LARGE
REAR: SMALL or LARGE
SUB: ON or OFF
In the case of DOLBY PRO LOGIC, your choices are:
FRONT: SMALL or LARGE
CENTER: NONE or SMALL or LARGE
REAR: SMALL or LARGE
SUB: ON or OFF
In the case of 3 STEREO, your choices are:
FRONT: SMALL or LARGE
CENTER: SMALL or LARGE
REAR: NONE
SUB: ON or OFF
8) Entering LANGUAGE from the MAIN MENU brings up a
menu that allows you to change the language of the on
screen menus.