TECNA WELD TESTER TE1700
You can simultaneously view a maximum of two quantities on the
graph; the selected quantities appear without the X whilst quantities
with the X are not shown in the graph.
If you wish to view the force graph, the other quantities will be
deactivated automatically.
I Welding current.
V Secondary voltage. Requires measurement of the voltage at the
electrodes.
E Energy dispensed during the weld. Requires measurement of the
voltage at the electrodes.
R Electrical resistance of the material. Requires measurement of the
voltage at the electrodes.
WARNING: in the event the voltage and current values are
considerably low, the electrical resistance value is forced to zero.
F Measurement of the force exerted by the electrodes during the
welding process.
PAGE 12
To Next Page
Loading...
