TECNA TE1700 - Limit Config Menu

TECNA WELD TESTER TE1700
6.1.5 LIMIT CONFIG MENU
Measurement check limits configuration menu.
B BACK TO MAIN MENU: Returns to the main menu.
0 LIMIT MASK NUMBER: Represents the numeric identifier of the
check limits mask to be programmed or selected. Between 1 and 15
and can only be programmed remotely.
1 LIMIT NUMBER 1 TYPE: For selecting the type of control in IK, ENE,
TIME, FORCE or ID for the first mask limit.
2 LIMIT NUMBER 1 MIN: For setting the minimum value of the first
mask limit.
PAGE 65