TECNA WELD TESTER TE1700
2.1 MEASUREMENT GRAPH
Available in NORMAL mode only
Allows you to access the measured quantities graph with respect to
time.
This function is only active in NORMAL work mode and is not available
in CONTINUOUS mode.
You can view a maximum of two quantities on the graph, chosen
among welding current, secondary voltage, energy and resistance.
Force is plotted on its own on a dedicated graph, while the other
quantities can be selected independently; quantities are chosen from
the MEASUREMENT GRAPH CONFIGURATION menu.
Acquiring spots while inside the MEASUREMENT GRAPH screen will
decrease the max acquisition rate.
The MEASUREMENT GRAPH screen appears empty when accessed
before the instrument has been able to perform a measurement.
PAGE 8
To Next Page
Loading...
