TECNA WELD TESTER TE1700
The selected quantities appear without the X whilst quantities with the
X will not be shown in the measurement data; a maximum of 2
electrical quantities can be displayed simultaneously.
I Welding current.
V Secondary voltage. Requires measurement of the voltage at the
electrodes.
E Energy dispensed during the weld. Requires measurement of the
voltage at the electrodes.
P Power dispensed during the weld. Requires measurement of the
voltage at the electrodes.
I2t Thermal current Ith of the welding process performed.
Ith CLEAR Deletion of the thermal current samples Ith of the
welding process performed.
PAGE 21
To Next Page
Loading...
