TECNA WELD TESTER TE1700
Reset counter for saving files.
Every file saved to pen-drive contains a progressive number to
facilitate subsequent identification; pressing the key resets the
progressive number to its default value "0" and displays the following
message.
Clears the spots internal memory.
Clears the internal memory in which the weld spots are stored. It must
be cleared every time a new measurement campaign is begun or when
switching from NORMAL to ADVANCED statistics mode and vice versa.
The instrument memory can store up to 20000 spots. When the weld
spots memory is full, it deletes automatically. The following message is
displayed when the key is pressed.
PAGE 40
To Next Page
Loading...
