25
(1):15-0 Drive Horsepower Code
15-0 Inverter Model 15-0 Inverter Model
2P5 R500AC / BC 401 0001BE
201 0001AC / BC 402 0002BE
202 0002AC / BC 403 0003BE
203 0003AC / BC 405 0005BE
205 0005BC 408 7R50BE
208 7R50BC 410 0010BE
210 0010BC 415 0015BE
215 0015BC 420 0020BE
220 0020BC 425 0025BE
225 0025BC 430 0030BE
230 0030BC 440 0040BE
240
JNTHBCBA
0040BC 450 0050BE
460 0060BE
475
JNTHBCBA
0075BE
(2):15-1 Software Version
(3):15-2 Fault Jog (Latest 3 times)
1. When the inverter doesn’t work normally, the former fault log stored in 2.xxx will be
moved to 3.xxx, and the fault log in 1.xxx moved to 2.xxx. The present fault will be
stored in 1.xxx. The fault stored in 3.xxx is the earliest one of the three, while the one
1.xxxx is the latest.
2. In 15-2, the fault 1.xxxx will be displayed at first, press▲, you can read
2.xxx→3.xxx→1.xxx, whereas▼, the order is 3.xxx→2.xxx→1.xxx→3.xxx.
3. In 15-2, the three fault log will be cleared when the reset key is pressed. The log
content will changed to 1.---, 2.---, 3.---.
4. Ex. If the fault log content is ‘1.OCC’ which indicates the latest fault is OC-C.
(4):15-3: Accumulated Operation Time 1 (Hours) 0 – 9999
15-4: Accumulated Operation Time 2 (Hours X 10000) 0 - 27
15-5: Accumulated Operation Time Mode 0000: Power on time
0001: Operation time
1. When the operation time 1 is set to 9999, the operation time 2 will be add by 1 at next
hour, meanwhile, the value of operation time 1 will be cleared to 0000.
2. Description of operation time selection:
Preset value Description
0 Power on, count the accumulated time.
1 Inverter operation, count the accumulated operation time.
To Next Page
Loading...
