iv Challenger Series Installation and Quick Programming Manual
Preface
This manual applies to the following Challenger Series control panels:
• Challenger10 (model TS1016 with external 16 Volt AC plug pack or model
TS1016T with internal 240 VAC mains transformer).
• ChallengerSE (model TS1016SE) with external 16 Volt AC plug pack. Refer
to “ChallengerSE functionality” on page 2 for more information.
• ChallengerLE (model TS1016LE) with external 16 Volt AC plug pack. Refer to
“ChallengerLE functionality” on page 3 for more information.
The product name “Challenger” will be used for all Challenger Series panels
unless otherwise noted. The term “Challenger Series” does not apply to legacy
products such as Challenger V8.
The Challenger Series Installation and Quick Programming Manual is for
installation technicians to install a Challenger panel.
Refer also to other Challenger manuals in the suite.
• The Challenger Series Programming Manual is for system administrators and
installers who need to manage the Challenger system via its
text-based user interface (in particular the “Install” menu”).
• The Challenger Series Users Manual is suitable for most users of the
Challenger system to perform everyday tasks.
• The Challenger Series Administrators Manual is for users and system
administrators who need to manage the Challenger system via its text-based
user interface (in particular the User menu).
Notes
• The permissions assigned to you may not allow you to do everything
described in this manual. You may not be able to see all menu items
described in this manual.
• A qualified service person, complying with all applicable codes, should
perform all required hardware installation.
To Next Page
Loading...
