The Assigned RAS tab shows a list of assigned RASs.
Click the Assign button to open the Assigned RAS dialog to assign a RAS to
the NAC.
Click the Edit button to open the Assigned RAS dialog to edit the settings of
the selected assigned RAS in the RAS list.
Click the Remove button to remove the selected RAS from the RAS list.
The following figure shows the Assigned RAS dialog:
RAS no
Enter the RAS number from 1 to 32. RAS numbers from 1 to 16 are defined to be
on Bus 1, and RAS numbers from 17 to 32 are defined to be on Bus 2.
Poll
Tick the check box to poll the RAS.
To Next Page
Loading...
