Betriebsanleitung/Operating manual
F5301/F53C1/F53S1
www.tecsis.de BD_BE_907 c 39
8.1 Load pin, dimensions
The first document to watch is the customer specific control drawing of
the corresponding article number. For the models F5301 / F53C1 /
F53S1 there is no standard dimensions.
9 Accessories
Cables with M12 x 1 connector
Version „straight“ Version „angled“
Other cable lengths and cable types are available on request. For versions ATEX/IECEx Ex ib
must be used only cables which approved for ATEX/IECEx.
To Next Page
Loading...