SLEEP
Auto-scan with pre-listening
moving
Frequency
running
Method 3: AUTO BROWSE STATION
1. Turn on the radio and short
press the [VF] button with
the frequency flashing.
2. Long press the [VF] button
with [ ] moving to scan
from one station to another,
staying on each stations
for about 5 seconds.
3. To stop auto browse function,
simply press the [VF] button.
10
MW station: It is recommendable to perform the ETM
function during day time as well as night time, because
there usually are more stations that start broadcasting at
night
SW station: It is recommendable to perform the ETM
function in the morning, afternoon as well as night time,
because the transmitting signal of SW is very unstable and
there usually are more stations that start broadcasting in
the late afternoon.
Method 2: MANUAL TUNING
Turn on the radio, short press the [VF] button to switch into
frequency mode. Rotate the [TUNING] knob to select your
station.
FAST/SLOW tuning is shown in the chart below for each band.
0.01 MHz
1kHz
1 kHz
1 kHz
0.1 MHz
9 /10kHz
9 kHz
5 kHz
FM
MW
LW
SW
step
band
turning step
Slow tuning mode
Fast tuning mode
turning step
Note: When the radio search & stop to a station, just
press [M] button once to store it.