EasyManua.ls Logo

Tecsun PL-380 - Clock and Alarm Settings; Setting the Clock; Setting the Alarm Time; Preset Alarm Station

Tecsun PL-380
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
SETTING THE CLOCK
1. Long press the [TIME] button until you see the hour
flashing. Rotate the [TUNING] knob to set the correct
hour, then short press the [TIME] button and notice the
minutes are flashing.
2. While it's flashing turn the [TUNING] knob to set the
correct minutes, then press [TIME].
SETTING THE ALARM TIME
1. Long press the [ALARM] button until both the HOUR &
AL flashing, rotate the [TUNING] knob to adjust the hour,
then short press [ALARM] with the minutes flashing.
2. Rotate the [TUNING] knob to adjust the minutes and
short press the [ALARM] button with the " " symbol
flashing.
3. Rotate the [TUNING] knob to select 1 ~ 90 minutes to set
the Auto Alarm Off Timer.
4. Short press the [ALARM] button to confirm and notice
" " shows on display to activate the alarm by buzzer
(BB sound). Short press twice with " " appears to set
the alarm by radio.
5. To turn off the alarm function, repeat short pressing the
[ALARM] button and notice both " " & " " disappear.
SLEEP
Note: You can also directly key-in the numeric key instead
of rotating the [TUNING] knob to set the correct clock.
PRESET ALARM STATION
1. Turn on the radio, then tune into your favorite alarm radio
station and adjust your desired alarm volume level.
2. Short press the [M] button to store the alarm station into
memory.
3. Repeat short pressing the [ALARM] button and notice
" " shows on the display to confirm the preset alarm
station.

Related product manuals