Tecsun PL-380 - Page 26

24
QUESTIONS ANSWERS SOLUTIONS
-Did not set the
proper radio station
for the alarm.
-Or there are no
broadcasting at
that radio station.
-Or you are in
another city where
does not have a
radio station for
your preset
frequency.
When the alarm
activated (alarm
by radio), there is
only noise with
the broadcast.
-Preset your alarm
station properly
(see the above
setting).
-Make sure it has
radio broadcast in
your location.
-Or set the alarm by
buzzer.
radio malfunction.
This may caused
by interference,
and the computer
microchip not
function properly.
Remove the battery,
then you can reload.
If it is still not able to
work, please contact
your nearest dealer
for customer service.