15
EN
PORRIDGE FUNCTION
• Press «Menu» key to select function «Porridge». The screen displays the
default cooking time, the light of «Start» will ash.
• Press «Timer» key to activate the time setting function and then press
«<» and «>» to change the cooking time.
• Press «Temperature» key to activate the temperature setting function
and then press «<» and «>» to change the cooking temperature.
• The light of “Stir” is ON by default. It means the “Stir” function is activated
by default. Press the “Stir” key to turn OFF the “Stir” function. If the “Stir”
icon does not light up it means the function will be OFF. Do not forget
to place the stirring paddle inside the cooking pot (g.6 & g.7) if you
activate the “Stir” function.
• Press «Start» key. The multicooker will start the “Porridge” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” three times and
begin the keep warm program, the “Keep Warm” indicator will come on
and the screen will display the time for which the keep warm function
has been active.
YOGURT FUNCTION
• Press «Menu» key to select function «Yogurt». The screen displays the
default cooking time «08:00», the light of «Start» will ash.
• Press «Timer» key to activate the time setting function and then press
«<» and «>» to change the cooking time.
• Press «Stir» key and the light of “Stir” lights up. Press again and
the “Stir” function will be o. If no action is done before starting the
cooking, the stirring function will be o. For this function, if the paddle
is activated, it will only stir during the last 15 min of the cooking time in
order to do mixed yogurt.
• Press «Start» key. The multicooker will start the “Yogurt” cooking
program and the “Start” light will remain ON. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” three times.
Note: No keep warm function for this function
To Next Page
Loading...
Need help?
General
