35
EN
AUTO RINSE FUNCTION
• Use the automotic auto-rinse function to carry out a prewash of the
bowl.
• To use the autorinse function, assemble the rinsing tool with the
bottom connector, and the support ring - g14.
• Put it in the bowl and add 600mL of water - g.15.
• Press the “Auto-rinse” key.
• The default auto-rinse time is 10 minutes, press “Timer” key to activate
the time setting function and then press «<» and «>» to change the
rinsing time.
ON COMPLETION OF COOKING
• Open the lid – g.1.
• Glove must be used when manipulating the cooking bowl and steam
tray – g.12.
• Serve the food using the spoon provided with your appliance and
reclose the lid.
• 24 hours is the maximum keeping warm time.
• Press «Keep Warm/Cancel» key to nish keep warm status.
• Unplug the appliance.
To Next Page
Loading...
Need help?
General
