● Before changing the filter cartridges hold ready an appropriate container (e.g. PE bag) for
disposal.
The polluted filter cartridges must be packed into an appropriate container
(e.g. PE bag). PE bags are optionally available (see list of spare parts)! We recommend
having disposal bags in stock.
● Open the service door of the filter cartridges. Also open the service door of the cleaning
housing. This is only possible by means of a special electrical spanner.
● Slip the disposal bag from bottom to top over the filter cartridge (A).
● Unfasten the 3 thumb screws (B) of the filter cartridge by turning them clockwise.
● Grab the filter cartridge and turn it a little clockwise to disconnect it from the screw fastening.
Therefore do not touch the filter cartridge directly with your hands, but grab it from the outside
through the bag.
● Carefully close the disposal bag (e.g. with a cable fastener) and store or dispose of it together
with the polluted filter cartridge in an appropriate container according to the regulations.
● Insert the new filter cartridge into the screw fastening and turn it anticlockwise to the hilt.
Only use TEKA spare filters. Otherwise the proper functioning of the unit is
not guaranteed.
● Hand-tight screw the 3 thumb screws.
● Carry out this procedure for all filter cartridges.
● Close the service door.
BA_LFE-101-201-301_ST1_20230808_EN
To Next Page
Loading...
