8.2. Sources of ignition
The operator of the filter unit must ensure that no effective sources of ignition enter the filter unit, such
as
a) Flames and hot gases,
b) Mechanically generated sparks.
Explosion hazard!
Externally entered effective sources of ignition can cause explosions.
8.2.1. Evaluating the risk of ignition in accordance with DIN EN 80079-36
For the evaluation of the risk of ignition, see the Appendix.
9. Dismantling / Disposal
Only authorised personnel may disassemble the machine.
Dangers arising from electricity.
Before the dismantling of the machine it has to be disconnected from the power supply and
all supply lines.
Explosion hazard due to dust formation.
Avoid whirling up deposited dust during all maintenance work. Keep away possible ignition
sources from the installation at any time. Use suitable tools to clean and to bond dust during
cleaning work.
Whirling up dust is possible due to the deposited dust.
During all work a suitable respiratory protection and protective clothing have to be worn.
The operator is obliged to store and dispose of the collected dust in accordance with national or
regional regulations.
BA_LFE-101-201-301_ST1_20230808_EN
To Next Page
Loading...