Teka LFE 101 ST1 - ATEX Annex to the EC Declaration of Conformity; ATEX Devices; ATEX Components

14. ATEX Annex to the EC declaration of conformity
We, TEKA Absaug und Entsorgungstechnologie GmbH, declare that the machine/system/components
listed below comply with the relevant requirements of the
ATEX Directive 2014/34/EU, of the
German Hazardous Substances Regulation (GefStoffV) and the
German Law on Product Safety (ProdSG) concerning equipment and protective systems
intended for use in potentially explosive atmospheres.
Filter unit type / Designation
LFE 101 ST1 / LFE 201 ST1 / LFE 301 ST1
II 1D/3D/- X
14.1. ATEX devices
Designation:
Membrane solenoid valve (for filter cleaning)
Type: 8296363.8176.02400
Identification:
II 3D Ex tc IIIC T130°C Dc IP65
Manufacturer:
Buschjost GmbH
Detmolder Straße 256
32545 Bad Oeynhausen
Germany
ATEX conformity
Available
14.2. ATEX components
Designation:
Filter cartridge 2,7m² antistatic
Filter material FE2576
Art.Nr.:6160609302706
Manufacturer:
Freudenberg Filtration Technologies SE & Co. KG
Höhnerweg 2-4
69469 Weinheim
Germany
Suitability of filter material:
Acc. to manufacturer’s certification: Freudenberg
BA_LFE-101-201-301_ST1_20230808_EN
38
08.08.2023