Damage at the extraction elements.
Replace the extraction elements.
Maybe throttle valves are used in the
suction line.
11. List of spare parts
Filter cartridge, Type “easy clean nano - antistatic”, 2,7m² (Ø145 x 600
mm)
( 3 pieces of these filter elements are required for the device)
Particle filter “H13” (337 x 230 x 100)
Activated carbon cassette, 7,5 kg activated carbon (337 x 230 x 212), in
the galvanized housing
or:
7,5 kg activated carbon, including filter fleece mats
Cooling air filter for turbine (62x62x48)
Filter mats for the air outlet grille (10 pieces)
Dust filter for measuring tubes, for tubes Ø6 outer diameter
PE-bag for the disposal of filter cartridges (6 pieces)
Slack lime Ca(OH)2 for filter cartridges, 3200g (in a bucket)
Particle sensor (detector head)
BA_LFE-101-201-301_ST1_20230808_EN