17. Annex A: ATEX conductivity measurement protocol
based on DIN EN 60079 -32 - 2
Machine No.: _____________________
Contact person: _____________________
Date: _____________________
Measurement performed
by: _________________________________
Signature: _________________________
Measurement instrument:
Type: _______________
last calibration: _____________________
Test number: _____________________
Environmental variables:
Temperature: __________________________
Humidity: ___________________________
Reference points for the individual measurements can be found in the table below.
A leakage resistance of < 10^6 Ohm must be achieved.
BA_LFE-101-201-301_ST1_20230808_EN
To Next Page
Loading...
