● Open the service door of the dust collecting housing (see chapter 2.1).
● Release the two earth connections.
● Resolve the clamping lever (B) of the dust collecting tank (A).
● Carefully pull the dust collecting tank out of the housing.
● Empty the dust collecting tank into an appropriate, closable container or bag. Dispose of or
store the dust according to the regulations.
● Push the dust collecting tank back into the dust collecting housing.
● Manipulate the clamping lever so that the dust collection container is pressed tightly against the
above housing.
● Re-establish the two earth connections.
There is a risk of explosion during operation if an earth connection is not
attached.
● Close the service door.
BA_LFE-101-201-301_ST1_20230808_EN
To Next Page
Loading...
