Evaluation of the risk of ignition based on DIN EN ISO 80079-36:2016-12
PROCEDURE NUMBER --- (cross-project)
MANUFACTURER
TEKA Absaug- und Entsorgungstechnologie GmbH
Millenkamp 9
D-48653 Coesfeld
DEVICE TYPE LFE, version ST1 DEVICE GROUP II
DEVICE DESCRIPTION The construction and intended use of the device are described in separate documentation (see Operating Instructions)
1 2 3 4
RISK OF IGNITION
EVALUATION OF FREQUENCY OF OCCURRENCE WITH
NO ADDITIONAL MEASURES EMPLOYED
MEASURES EMPLOYED TO PREVENT EMERGENCE
FREQUENCY OF OCCURRENCE INCLUDING
MEASURES
a b
a b c d
e a b c a b c d
e f
Seq. No.
POTENTIAL IGNITION
SOURCE
CAUSE
(Under what
circumstances does the
risk of ignition occur?)
IN NORMAL OPERATION
WHEN MALFUNCTION EXPECTED
ON INFREQUENT MALFUNCTION
NOT RELEVANT
REASON DESCRIPTION
BASIS
(standards,
technical
regulations,
experimental
results)
Technical
Documentation
(incl. the relevant
properties listed in
column 1)
IN NORMAL OPERATION
WHEN MALFUNCTION EXPECTED
ON INFREQUENT MALFUNCTION
NOT RELEVANT
RESULTING EPL FOR THIS IGNITION
HAZARD
NECESSARY RESTRICTIONS
To Previous Page
Loading...
