Teknatool nova Neptune DVR - NOVA Neptune DVR 15 DVR Lathe Features & Specification

5
128-01-2305
128-0621-003
2.NOVA Neptune DVR 15” DVR Lathe Features & Specification
Feature Name
Description
DIGITAL VARIABLE
RELUCTANCE (DVR)
ELECTRONIC DRIVE
The DVR motor uses smart motor technology to provide an incredibly smooth
and powerful direct drive. The controller constantly monitors the spindle
position and maintains optimal spindle speed. Additional power is added as it
senses extra load from the tool.
POWER TO TURN AND BURN
220~240V / 10A 1.1KW (1.5HP)
110-120V / 14A 1.1KW (1.5HP)
Slidable 360° SWIVEL
HEADSTOCK
Slidable headstock
Lock at any position, plus detent locating positions at 0°, 22.5°, 45° and 90°.
High accuracy and easy swivel
SOLID BED STRUCTURE
CAD designed webbing to absorb vibration throughout the bed length.
Exceptional structural strength.
4 FAVOURITE SPEED FUNCTION
Program your favourite speeds for faster and more efficient project set ups
FLEXIBLE CAPACITY TO MATCH
YOUR PROJECT
- 15" / 381mm Capacity Over Bed
- 20" / 508mm Capacity Outboard (with optional outrigger accessory)
- 18”/ 457 mm Between Centres
SAFETY SENSING FEATURE
It senses faults in the setup and advises of safety issues - such as chisel dig in
and spindle lock. It then instantly shuts down power to the spindle.
ENERGY EFFICIENT
Intelligent (computer controlled) motor only draws as much power as it needs
for the application
INCREDIBLE VARIABLE SPEED
RANGE
50 RPM - 3,500 RPM
WARRANTY
* 10 Year Warranty on DVR motor (Bearings, sensor excluded)
* 5 Year Warranty on Motor Electronics and mechanical parts
* Restrictions apply