Teknic ClearPath-SCSK Series User Manual

C LEAR P ATH -SC U SER M ANUAL R EV . 1.36 48
T
EKNIC , I NC . T EL . (585) 784-7454
S
ETTING B RAKE C ONTROL B EHAVIOR IN C LEAR V IEW
The Brake Control outputs can be toggled manually or set to automatic
operation through the ClearView Actions menu: Actions>Brake 0, or
Actions>Brake 1.
Additional notes:
• Only two brake control outputs can be used per port connection;
i.e. if four SC Hubs are chained together, only the two brake
control outputs on the first SC Hub will be controllable.

Teknic ClearPath-SCSK Series Specifications

General

Brand	Teknic
Model	ClearPath-SCSK Series
Category	Engine
Language	English