Tektronix 2465B Operator's Manual

Operation
Table 2-4
Sweep Triggering
Selection
A-AND-B
A-OR-B
A:WR
B:WR
Triggers
A Sweep
A Sweep
A Sweep
B Sweep
When
AND of A and B Triggers A:A- B changes from
FALSE to TRUE.
OR of A and B Triggers A:A-i-B changes from
FALSE to TRUE.
Word Recognizer detects the selected word.
Word Recognizer detects the selected word.
Canceling Menu Functions
To exit from any MEASURE menu, select OFF from the menu or press any
other front panel switch except VERTICAL MODE or MEASURE.
Pressing MEASURE while in a menu cycles HELP text lines through the
bottom line of the readout.
When a logic trigger is active, selecting AUTO LVL Trigger Mode cancels the
function.
2465B/2455B/2445B Operators 2-33

Tektronix 2465B Specifications

General

Bandwidth	400 MHz
Channels	4
Vertical Sensitivity	2 mV/div to 5 V/div
Maximum Input Voltage	400 V (DC + peak AC)
Display	CRT
Trigger Modes	Auto, Normal, Single
Time Base Range	500 ps/div to 0.5 s/div
Rise Time	875 ps
Power Supply	48 to 440 Hz
Dimensions	495 mm