Tektronix 2467B - Service Manual

Service Manual
Tektronix
2465B & 2467B
Oscilloscopes
070-6863-01
Warning
The servicing instructions are for use by qualified
personnel only. To avoid personal injury, do not
perform any servicing unless you are qualified to
do so. Refer to the Safety Summary prior to
performing service.
Please check for change information at the rear
of this manual.

Tektronix 2467B Specifications

General

Type	Oscilloscope
Bandwidth	400 MHz
Channels	4
Vertical Sensitivity	2 mV/div to 5 V/div
Display	CRT
Input Impedance	1 MΩ ± 2% in parallel with 15 pF
Sweep Speed	500 ps/div to 0.5 s/div
Trigger Modes	Auto, Norm, Single
Trigger Sources	CH1, CH2, CH3, CH4, Line, Ext
Rise Time	875 ps
Time Base Range	500 ps/div to 0.5 s/div
Maximum Input Voltage	400 V (DC + AC peak)
Power Requirements	48 to 440 Hz