Tektronix 2465B Service Manual

Specification—2465B/2467B Service
Table 1-1 (cont)
Characteristics
Performance Requirements
DISPLAY
Cursor Position Range
Delta Volts (AV)
Delta Time (At)
Graticule
Size
2467B
2465B
Markings
Trace Rotation Range
Standard Phosphor
Visual Writing Rate
2467B
2465B
Photographic Writing Speed (2467B)
Display Intensity Limitation (2467B)
At least the center 7.6 vertical divisions.
At least the center 9.6 horizontal divisions.
68 mm X 85 mm.
a
80 mm X 100 mm.
a
8 major divisions vertically and 10 major divisions horizontally, with
auxiliary markings.
3
Adequate to align trace with the center horizontal graticule line.
P31
a
=s4 divisions/ns.
NOTE
Using the standard-accessory color filter, no more than 5 bright
spots will be visible at maximum intensity and no bright-spot halo
will be visible within the center 7X9 divisions. Additional bright
spots may be visible after displaying a high-intensity trace. These
added spots will extinguish when intensity is set to minimum.
5=20 divisions/Vs.
>10 divisions/ns.
Control settings and trigger rate are monitored to limit the display
intensity after a time of no control activity.
3
Z-AXIS INPUT
Sensitivity
Dc to 2 MHz
2 MHz to 20 MHz
Input Resistance
Maximum Input Voltage A\
Positive voltage decreases intensity; +2 V blanks a maximum
intensity trace.
+ 2 V modulates a normal intensity trace.
3
9 k« ±10%.
a
±25 V peak; 25 V p-p ac at 10 kHz or less.
3
"Performance requirement not checked in manual.
1-9

Tektronix 2465B Specifications

General

Brand	Tektronix
Model	2465B
Category	Test Equipment
Language	English