Tektronix 5 Series MSO Printable Help

Search configuration menu
Use the Search configuration menu to define conditions that you want to search for on a channel or waveform signal. Each
occurrence of the search condition is marked on the signal with a triangle along the top of the waveform slice or view.
To open the Search menu, double-tap on a Search badge in the Results bar.
See the following links for information on the search type menus.
Bus Search configuration menus on page 230
Edge Search configuration menu on page 250
Logic search configuration menu on page 251
Pulse Width Search configuration menu on page 253
Rise/Fall Time Search configuration menu on page 255
Runt Search configuration menu on page 257
Setup and Hold Search configuration menu on page 258
Timeout Search configuration menu on page 260
Window Search configuration menu on page 262
Trigger configuration menu overview
Use the Trigger menu to define the channel or waveform signal conditions on which to trigger the oscilloscope. The trigger event
establishes the time-reference point in the waveform record. All waveform record data is located in time with respect to the trigger
point.
To access the Trigger menu, double-tap the Trigger badge on the Settings bar. The Trigger menu opens to show the current
trigger settings.
Use the following links to see more information on specific trigger types.
■
Bus Trigger Menu
■
Edge Trigger menu
■
Logic Trigger
■
Pulse Width Trigger menu
■
Rise/Fall Time Trigger menu
■
Runt Trigger menu
■
Sequence Trigger menu
■
Setup & Hold Trigger menu
■
Timeout Trigger menu
■
Window Trigger menu
Menus and dialog boxes
MSO54, MSO56, MSO58, MSO58LP, MSO64 Help 341

Tektronix 5 Series MSO Specifications

General

Brand	Tektronix
Model	5 Series MSO
Category	Test Equipment
Language	English