6. Select and add other measurements for the current source. Tap the measurement category panels to display and select
other measurements to add.
7. To add measurements for other sources, select a different source, select a measurement, and add the measurement.
8. Tap outside the Add Measurements menu to close the menu.
9. To further adjust a measurement's settings, double-tap a measurement badge to open a configuration menu for that
measurement. See Configure a measurement on page 97.
10. Tap the Help icon on the menu title for more information on settings.
Analog channel operating basics
96 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help
To Next Page
Loading...
