Recall configuration menu (File menu)
Use this menu to recall (load) reference waveforms, instrument setups, and sessions (setup plus waveforms).
To open the file Recall configuration menu:
1. Tap File on the menu bar.
2. Tap Recall to open the Recall configuration menu.
File operations and Microsoft Windows 10 Operating System SSD. Instruments with Windows 10 SSD will display the
standard Windows file tools to navigate to and select files and folders.
The Windows operating system assigns the first available drive letter (typically E:) to the first USB device attached to the
oscilloscope, regardless of which port the USB device is plugged into. The next plugged-in USB device is assigned the next
available drive letter (such as F:) and so on for other installed devices. This is different from standard instruments (without
Windows 10 installed), which assign a non-changing drive letter to each USB port.
Menus and dialog boxes
278 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help
To Next Page
Loading...
Need help?
General
