Tektronix 5 Series

Other trigger types.
■
Bus Trigger Menu
■
Edge Trigger menu
■
Logic Trigger menu
■
Pulse Width Trigger menu
■
Runt Trigger menu
■
Sequence Trigger menu
■
Setup and Hold Trigger menu
■
Timeout Trigger menu
■
Window Trigger menu
Runt Trigger configuration menu
Use the Runt trigger to trigger on waveforms where a short pulse crosses one threshold but fails to cross a second threshold
before recrossing the first.
To open the Runt trigger configuration menu:
1. Double-tap the Trigger badge on the Settings bar.
2. Set the Trigger Type to Runt.
Menus and dialog boxes
388 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help