MyScope
Using MyScope Control Windows
To open a previously defined MyScope control w indow, do the following:
1. Select MyScope > Open Control
Window... or one of the five most
recently used MyScope windows.
2. Select the MyScope control window you
want to use, and then click Open.
To display the active MyScope control window, do the following:
1. Select MyScope > Current... or click
MyScope in the toolbar mode. (Your
MyScope control window remains active
even when it is not displayed.)
To edit a MyScope control window do the following:
108 DPO7000 Series and DPO /DS A70000/B Series Quick Start User Manual
To Next Page
Loading...
Need help?
General
