Commands Listed in Alphabetical Order
COMPensate:R
ECAll:FACTory:MAInframe (No Query Form)
This command (no query form) recalls compensation data from the nonvolatile
factory memory of the mainframe into its associated in-use (that is, run-time)
compensatio
nmemory.
Group
Compensation
Syntax
COMPensate:RECAll:FACTory: MAInframe
Examples
COMPENSATE:RECALL:FACTORY: MAINFRAME.
COMPensate:RECAll:USER:ALL (No Query Form)
This command (no query form) recalls compensation data for the mainframe and
all resident module channels from their respective nonvolatile user memories into
the current, in-use (that is, run-time) compensation memory.
Group
Compensation
Syntax
COMPensate:RECAll:USER:ALL
Examples
COMPENSATE:RECALL:USER:ALL.
COMPensate:RECAll:USER:CH<x> (No Query Form)
This command (no query form) recalls compensation data from the nonvola
tile
user memory of the module channel into its associated in-use (that is, run-time)
compensation memory.
Group
Compensation
Syntax
COMPensate:RECAll:USER:CH< x>
Examples
COMPENSATE:RECALL:USER:CH1.
DSA/CSA/TDS8X00/B Series Programmer Manual 2-95
To Next Page
Loading...
