Command Syntax
DISplay:STYle
:NORMal;ACQuire:NUMAVg 10 (no colon before ACQuire)
DISplay:COLor:CURSor1 1;:CURSor2 5 (extra colon before CURSor2; use
DISplay:COLo
r:CURSor11;CURSor25instead)
DISplay:STYle:NORMal;:*OPC (colon before a star (*) command)
ISPlay:COLor:CURSor1 1;COLor:CURSor2 5 (levels of the mnemonics
are different; either remove the second use of COLor or p lace :DISplay: in
front of COL
or:CURSor2 5)
Terminating
This documentation u ses <EOM> (End of message) to represent a mess age
terminator.
Table 2-
17: End of Message Terminator
Symbol Meaning
<EOM>
Message
terminator
The end-of-message terminator must be the END message (EOI asserted
concurrently with the last data byte). The last data byte may b e an ASCII linefeed
(LF) character. This instrument does not support ASCII LF only message
termi
nation. The instrument always terminate s outgoing mes sages with LF and
EOI. It allows white space before the terminator. For example, it allows CR LF.
2-12 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
