Tektronix MSO5204B

Working with your oscilloscope
The following topics describe features of your Tektronix oscilloscope. Even if you are an experienced user, you may want to
browse through these topics to learn new ways of doing familiar tasks.
Basic operations.
■
Using the Instrument Interface
■
Changing Control Settings
■
Moving and Docking Control Windows
■
Controlling from within the Graticule Area
■
Initializing the Instrument
■
Choosing and Connecting Probes
■
Creating your Own Control Windows
Waveform operations.
■
Using Time Bases and Triggering
■
Looking at Waveform Details
■
Using Fast Acquisition and DPO
■
Using Logic Waveforms MSO Series
■
Using Waveform Math
■
Using Spectral Analysis
■
Characterizing a Signal
■
Adding Application-Specific Measurements
Windows environment.
■
Connecting to a Network
■
Printing a Hard Copy
■
Using Other PC Applications
■
Using a Second Monitor
■
Connecting to Other Instruments
■
Access Shortcut Menus with Right-click
Set the window trigger levels
The upper and lower threshold levels define the voltage limits of the window.
To adjust the upper threshold level:
1. Click the Upper Level entry box.
2. Use the multipurpose knob to set the voltage level.
To adjust the lower threshold level:
1. Click the Lower Level entry box.
2. Use the other multipurpose knob to set the voltage level.
Oscilloscope reference
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 865