Preface
This manual provides product safety and compliance information, describes how to connect and power on the oscilloscope, and introduces
the instrument features, controls and basic operations. See the product Help file for more detailed information.
Key features
Welcome to the 5 Series MSO Low Profile. The 5 Series MSO Low Profile (MSO58LP) is an 8-channel oscilloscope with the world's first
FlexChannel
®
-based inputs, enabling you to efficiently and cost-effectively perform mixed signal debugging on virtually any design.
• Low profile instrument with no display, comes ready to install in a 2U rack mount space
• 500 MHz (upgradeable) and 1 GHz bandwidths
• 8 channels with FlexChannel
®
inputs
• Each FlexChannel input is dual-purpose, letting you connect either an analog probe (TekVPI
®
or BNC) or an eight-channel digital probe
(the TLP058 FlexChannel Logic Probe)
• Each FlexChannel can display 8 digital channels (with TLP058), an analog waveform, a spectrum trace, or both an analog and spectral
view of the same channel at the same time with independent controls for each view
• Maximum 6.25 GS/s sample rate
• 125 M points record length on all channels (optional 250, 500 M record length available)
• 500,000 waveforms/second maximum waveform capture rate
• Cursors analysis: Waveform, V Bars, H Bars, V&H Bars, Multi source cursor (readouts)
• Spectrum View enables simple, intuitive frequency domain analysis, independent of time domain controls, to show a spectral trace for
each channel
• FastFrame
™
segmented memory acquisition uses multiple trigger events to capture widely spaced events of interest at high sample
rates while conserving acquisition memory
• No set limit on the number of math, reference, and bus waveforms you can acquire (the number of waveforms depends on available
system memory)
• Integrated options include a 50 MHz arbitrary/function generator (AFG), and a Digital Voltmeter (DVM) and trigger frequency counter
• Advanced serial bus triggering and analysis options let you decode and trigger on industry standard buses. See the Serial bus and
trigger options Help topic
• Power, WBG-DPT, Spectrum measurements, DPM, IMDA, and Jitter options provide additional measurement and analysis functions.
See the Advanced Power Analysis, DPM Analysis, and Advanced Jitter Analysis Help topics.
Check shipped accessories
Make sure that you received everything you ordered. If anything is missing, visit tek.com/contact-tek to find contacts in your area.
Check the packing list that came with your instrument to verify that you have received all standard accessories and ordered items. If you
purchased factory installed options, tap Help > About to confirm that the option(s) are listed in the Installed Options table.
Item Quantity Tektronix part number
5 Series MSO MSO58LP Installation and Safety Manual 1 071-3568-xx
Power cord 1 Depends on region
Calibration certificate 1 N/A
Report of factory installed licenses 1 N/A
Preface
MSO58LP 5 Series MSO Low Profile Quick Start Manual 15
To Next Page
Loading...
Need help?
General
