Tektronix RSA306 - Amplitude

Specifications
Amplitude
RF input impeda
nce
50 
RF input VSWR, typical  1.8:1 (10 MHz to 6200 MHz, reference level  +10 dBm)
(Equivalent Return Loss:  11 dB)
Maximum RF input level without
damage
The maximum voltage or power that the RF input can withstand without creating
a shock hazard or damaging the input.
DC voltage
±40 V
DC
Ref Level  –10 dBm +23 dBm (continuous or peak)
Ref Level < –10 dBm +15 dBm (continuous or peak)
Maximum RF input operating
level
The maximum level at the RF input for which the instrument will meet its
measurem
ent specifications.
Center fr
equency < 22 MHz
+15 dBm
Center f
requency  22 MHz
+20 dBm
Amplitude accuracy at all center
freque
ncies
Refere
nce level +20 dBm to –30 dBm, alignment run prior to testing
Applies to corrected IQ data, with signal to noise ratios > 40 dB
Accuracy may degrade up to ±0.6 dB after storage at maximum storage temperature,
recove
rs within 24 hours
Cente
r frequency 9 kHz to
<3GHz
±2.0 d
B (18 °C to 28 °C)
±1.25 dB (18 °C to 28 °C), typical (95% confidence)
±3.0 dB (–10 °C to 55 °C), typical
Center frequency  3GHzto
6.2 G
Hz
±2.75 dB (18 °C to 28 °C)
±2.0
dB (18 °C to 28 °C), typical (95% confidence)
±3.0 dB (–10 °C to 55 °C), typical
Channel amplitude flatness 
Reference level +20 dBm to –30 dBm, alignment run prior to testing
Applies to corrected IQ data, with signal to noise ratios > 40 dB
±1.
0 dB (18 °C to 28 °C)
±2.0 dB, (–10 ⁰Cto55⁰C), typical
±3.0 dB, 22 MHz - 24 MHz, (-10 ⁰Cto55⁰C), typical
3 RSA306 Specifications and Performance Verification