Important safet
y information
Examine the exterior of the product before you use it. Look for cracks or missing pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions. Be aware that condensation may occur if a unit is moved from a cold to a
warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Remove the input signals before you clean the product.
Provide proper ventilation. Refer to the installation instructions in the manual for details on installing the product
so it has proper ventilation.
Provide a s
afe working environment.
Avoid improper or prolonged use of keyboards, pointers, and button pads.
Improper or prolonged keyboard or pointer use may result in serious injury.
Be sure your work area meets applicable ergonomic standards. Consult with an ergonomics pro fessional to avoid s tress
injuries.
Use only the Tektronix rackmount hardware specified for this product.
Service
safety summary
The Service safety summary section contains additional information required to safely perform service on the product. Only
qualified personnel should perform service procedures. Read this Service safety summary and the General safety summary
before performing any service procedures.
To avoi
d electric shock.
Do not touch exposed connections.
Do not service alone. Do not perform internal service or adjustments o f this product unless another person c apable of
rendering first aid and resuscitation is present.
Disconnect power. To avoid electric shock, disconnect the USB 3.0 cable from the instrument before removing any
covers or panels, or opening the case for servicing.
Use care when servicing with power on. Disconnect power, remove battery (if applicable), and disconnect test leads
before removing protective panels, soldering, or replacing components.
iv RSA306 Specifications and Performance Verification
To Next Page
Need help?
General
