Tektronix RSA306 - Page 66

Performance ver
ification
DANL
Center frequency Measurement, dBc Specification, dB Pass/Fail
100 kHz
< –130 dBm/Hz
1MHz
< –130 dBm/Hz
10 MHz
< –130 dBm/Hz
20 MHz
< –130 dBm/Hz
22 MHz
< –160 dBm/
Hz
100 MHz
< –160 dBm/Hz
500 MHz
< –160 dBm/Hz
1 GHz < –160 dB
m/Hz
1.5 GHz < –158 dBm/Hz
2.0 GHz < –158 dBm/Hz
2.5 GH
z
< –155
dBm/Hz
3.0 GHz < –155 dBm/Hz
3.5 GHz < –155 dBm/Hz
4.0
GHz
<–1
55 dBm/Hz
4.5 GHz < –150 dBm/Hz
5.0 GHz < –150 dBm/Hz
5
.5 GHz
<
–150 dBm/Hz
6.0 GHz < –150 dBm/Hz
6.2 GHz < –150 dBm/Hz
Phase noise at 1 GHz center frequency
Phase noise offset
frequency Phase noise, dBc/Hz
Specification,
dBc/Hz Pass/Fail
1kHz
< –85 dBc/Hz
10 kHz
< –84 dBc/Hz
100 kHz
< –90 dBc/Hz
1MHz
< –118 dBc/Hz
Third Order intermodulation distortion at 2130 MHz center frequency
Test Measurement Specification, dBc Pass/Fail
IMD < –60 dBc
55 RSA306 Speci fications and Performance Verification