Operation
Ref number Item Description
1 Displays
Opens the Select Displays dialog box so that you can select measurement
displays.
2Markers
Opens or closes the M arker toolbar at the bottom of the window.
3
Settings Opens the Settings control panel for the selected display. Each display has
its own control panel.
4 Trigger
Opens the Trigger control panel so that you can define the trigger settings.
5
Acquire
Opens the Acquire control panel so that you can define the acquisition settings.
6 Analysis
Opens the Analysis control panel so that you can define the analysis settings
such as frequency, analysis time, and units.
7
Measurement
Frequency
Displays the Measurement Frequency. To change the value, click the text and
use the front panel knob to dial in a frequency. You can also enter a frequency
with the front panel keypad or use the front panel up and down buttons.
8
Reference Level Displays the reference lev el. To change the value, click the text and enter a
number from the keypad or use the front panel up and down buttons.
9 Amplitude
Opens the Amplitude control panel so that you can define the Reference Level,
configure internal attenuation, and enable/disable the (optional) Preamplifier.
10 Replay Runs a new measurement cycle on the existing acquisition data record using
any new settings.
24 RSA6100A Series & RS A5100A Series Quick Start User Manual
To Next Page
Loading...
